Use Overnight Loads

an overnight load lets you start loading a feeding today and then finish and drop it tomorrow it’s useful when you want a head start on busy mornings or want to split loading across shifts overnight loads are marked in the feeding schedule by this icon ⚠️ important once you start an overnight load docid\ hzg7mbz i esfiu9mmtln , be aware that the equipment stays locked to the overnight load until it’s finished or cancelled this means that you cannot use the same equipment to complete any other feedings until the overnight load is completed the following day if you connect to and attempt to feed using equipment containing an overnight load, an overnight load notification with a red alert icon is displayed if you started an overnight load by mistake or need to cancel one, use the cancel/abort option on the overnight load screen this will end the overnight load and unlock the equipment follow the steps below when using overnight loads start an overnight load (today) open feed → feeding schedule in the mobile app tap overnight load select tomorrow’s feeding that you want to begin preparing today start loading ingredients as you normally would pause for overnight while loading, tap resume tomorrow at the bottom of the screen to pause until tomorrow confirm to pause what happens the load is saved as paused ingredient usage loaded so far is recorded the selected equipment remains locked for this overnight load resume and complete (tomorrow) connect to the same equipment open feed → feeding schedule → overnight load select the paused load tap continue mix to finish loading drop the feed and complete the feeding as usual in the feed history report docid\ snfxayqxwiarjjjnqgd8w list, overnight loads are listed on the date they are completed cancel an overnight load if you started an overnight load by mistake or need to cancel one, use the cancel/abort option on the overnight load screen this will end the overnight load and unlock the equipment troubleshooting tips if you can’t start a feeding, check whether an overnight load is paused on that equipment if a load won’t resume, verify you’re connected to the same mixer/scale used to start it