Connect an Allflex Scanner

\<font color="#67854e">question\</font> how do i connect my allflex awr300 or apr600 scanner to an android device? \<font color="#67854e">answer\</font> use the steps below to connect your allflex awr300 or apr600 scanner to an android device if you purchased your allflex scanner from vas, follow the steps below to connect it to the pocket cowcard app on your android device was my scanner purchased from vas? check the back of your scanner to confirm if it was purchased from vas all scanners purchased from vas have vas scan the qr code stickers tip although these pairing instructions apply to the allflex apr250, awr300, and apr600 scanner models, images shown are from the awr300 expand the sections below to learn more required setup before you connect the allflex apr250 rfid scanner, allflex awr300 rfid scanner, or allflex apr600 rfid scanner, download the latest firmware from the allflex website https //www allflexsa com/products/readers/game livestock/ if you purchased the scanner from a third party, verify with the seller that the scanner has all of the necessary configuration files installed before you continue navigation tips the display is not a touchscreen; options are selected using the arrow buttons to confirm a selection, you must press the enter button to confirm options highlighted in orange or blue, press the red or blue button instead power on the scanner press the red button in the bottom half of the display to open the menu using the arrow buttons, select setup and press the enter button select interface setup and press the enter button select bluetooth and press the enter button select set bluetooth mode and enter button set the bluetooth mode for your device type a select slave mode and press the enter button b select set bt profile and press the enter button c select spp and press the enter button press the blue button to exit setup press the enter button to begin scanning