---
title: Configure Stall Read Delay in ParlorBoss
slug: help/en-us/parlorboss/configure-stall-read-delay-in-parlorboss
docTags: 
createdAt: 2026-06-11T18:50:25.892Z
---

<font color="#67854E">**Question\:**</font> How do I improve stall read accuracy on my rotary parlor without adjusting hardware?

<font color="#67854E">**Answer\:**</font> ParlorBoss includes a **Stall Read Delay** setting that applies a configurable delay (in milliseconds) between when a stall tag is scanned and when ParlorBoss registers the reading. This improves stall read accuracy by compensating for hardware timing differences, reducing the need for physical hardware calibration.

:::hint{type="success"}
🗒️ **NOTE:** This feature is available in ParlorBoss version 2.8.11 and late&#x72;**.**
:::

Follow the steps below to configure the stall read delay.

1. From ParlorBoss, select **Tools > Options**.
2. In the **Display Options** section, locate the **Stall Delay&#x20;**&#x66;ield.&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/3h8pSJcGUXEi4HGCCYPTA/moLMTlFss5o-nU3XHv61X_image.png" size="24" width="522" height="203" position="flex-start" darkWidth="522" darkHeight="203" showCaption="false" indent="1"}

3. Enter a value between **0** and **5000** milliseconds. For example, entering 3000 applies a 3-second delay between the scanner read and ParlorBoss registration.
4. Select **OK** to save your changes.

## Important Considerations

- The stall delay value **persists across system restarts** — you only need to set it once.
- The stall delay setting works with all supported scanners: Agrident COM, Nedap COM, and GEA MQTT.
- Adjusting this setting does not negatively impact system performance or PULSE reporting.
- If you enter a value greater than 5000, the system will warn you:

::Image[]{src="https://api.archbee.com/api/optimize/3h8pSJcGUXEi4HGCCYPTA/l2bjBZXWOznjiwKpzk4Fu_image.png" size="50" width="587" height="335" darkWidth="587" darkHeight="335" position="flex-start" showCaption="false" indent="1"}

:::Paragraph{indent="1"}
Selecting **OK** on the warning automatically sets the value to the maximum of 5000 ms.
:::