---
title: Scale-Tec POINT Scale
slug: help/en-us/feedcomp/scale-tec-point-scale
docTags: 
createdAt: 2026-04-21T16:54:21.153Z
---

Use these instructions to set up and connect a Scale-Tec POINT Scale to the FeedComp App.

:::hint{type="warning"}
⚠️**  IMPORTANT: **Visit the [Scale-Tec Support Center](https://support.scale-tec.com/portal/en/home) for instructions on scale calibration, troubleshooting, and more. Contact [Scale-Tec Support](https://scale-tec.com/contact/) if you need more help with your scale.
:::

## Configure Scale Settings

Before you connect a Scale-Tec POINT scale to the FeedComp App, you must update the scale's display setting. If you skip this step, the scale may send invalid values to the app, which can cause incomplete feedings.

1. Open the Scale-Tec POINT scale app.
2. Select the scale device.
3. Tap **Configure Device**.
4. Tap **Adjust Individual Settings**.
5. Under Display, tap **C1: Display Count** and set the value to **1**.
6. Tap **Submit** to save your changes.

## Connect a Scale to the FeedComp App

:::hint{type="success"}
🗒️ **NOTE:** Once you start an [overnight load](docId\:Hzg7MbZ-i-esfiu9MMtLN), be aware that the **equipment stays locked** to the overnight load until it’s finished or cancelled. This means that you **cannot use the same equipment to complete any other feedings** until the overnight load is completed. If you connect to and attempt to feed using equipment containing an overnight load, an overnight load notification with a red alert icon :inlineImage[]{src="https://api.archbee.com/api/optimize/3h8pSJcGUXEi4HGCCYPTA/j741gC25-S0qpJsYOawD5_alert-triangle-red.png" alt caption size="10" width="22" height="20"} displays. 

If you started an overnight load by mistake, you can [cancel or complete an overnight load](docId:8hCxBUb1xfseg6kqHmsN2) on the same day.
:::

1. Tap your user icon :inlineImage[]{src="https://api.archbee.com/api/optimize/3h8pSJcGUXEi4HGCCYPTA/TIzfdcfJw_kRk8AAGCnRr_greenuser25x25.png" alt caption size="10" width="25" height="25"} at the top right of the screen.
2. Tap :inlineImage[]{src="https://api.archbee.com/api/optimize/3h8pSJcGUXEi4HGCCYPTA/uBdjhhxuzdciJIz9vj_JA_settingsoutlined25x25.png" alt caption size="10" width="25" height="25"}** Settings**.
3. Select the **Equipment** to connect.
4. Tap **Connect to Scale** and select the scale to connect. After a scale is connected to your mobile device, the Bluetooth icon :inlineImage[]{src="https://api.archbee.com/api/optimize/3h8pSJcGUXEi4HGCCYPTA/LnYaE3tdg56PgPS3KptZS_bluetoothconnected20x25.png" alt caption size="10" width="20" height="25"} displays at the top left of each screen in the FeedComp App.

## Loader View

See [Set Up Loader View (BETA)](docId\:Jz7z-evo1pFXe8f3DBA5w) for setup details.